OUR FACTORY
Our Factory
In our factory we are using a wide variety of machines and tools to provide the highest possible level of service to our clients.
- All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is stationary to protect the profile surfaces
- Fast positioning of the machining unit with up to 66 m/min thanks to dynamic servo drives
- 6-sided machining. From below with an angle head (optional)
- The on-board tool magazines ensure that tool changing times are kept short, thereby optimizing machining cycles
- One magazine can be equipped with 13 standard tools and seven special tools (angle routing head and special cutters). An additional magazine for the saw blade, diameter 400 mm or 500 mm
- Autonomous clamp positioning with absolute measurement system
- Two separate working zones enable machining in shuttle operation. Secure access with safety fences and light barriers
- 5-axis CNC control with independent CNC for 3D machining, notching and cutting
Maximum flexibility and performance. Various configurations and a comprehensive range of performance options for every requirement and field of bending application.
Precision from the very first part. Intelligent assistant functions, such as the material curve generator and the LAMS angle measuring system, guarantee bending results with the highest precision while requiring only very few operating steps.
Precision from the very first part. Intelligent assistant functions, such as the material curve generator and the LAMS angle measuring system, guarantee bending results with the highest precision while requiring only very few operating steps.
Equipped with its Synchro technology, the AFM EP pressbrake fulfills the high demands placed on the process security by Bystronic customers.
The hydraulic-crowning system and the adaptation of the periphery to the customer’s numerous requirements ensure that the system is extremely flexible and that it produces good bending results across the entire spectrum of sheet thicknesses.
The hydraulic-crowning system and the adaptation of the periphery to the customer’s numerous requirements ensure that the system is extremely flexible and that it produces good bending results across the entire spectrum of sheet thicknesses.
- 5-axis profile machining centre
- Designed for flexible and efficient machining of aluminium and thin-walled steel profiles
- All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is stationary to protect the profile surface
- Fast positioning of the machining unit with up to 66 m/min thanks to dynamic servo drives
- 6-sided machining. From below with an angle head (optional)
The on-board tool magazines ensure that tool changing times are kept short, thereby optimizing machining cycles - One magazine can be equipped with 13 standard tools and seven special tools (angle routing head and special cutters). An additional magazine for the saw blade, diameter 400 mm or 500 mm
The SBZ 628 series offers ultimate flexibility in both machining and length cutting of aluminium profiles for metal construction and industrial applications. Its production reliability, speed, cost-effectiveness and impressive versatility make the flexible profile machining centre the perfect all-rounder.
It allows fully automatic machining of various profile types, such as for windows, doors and curtain walls, using up to eight routing units that can operate freely on the profile cross-section in coordination with patented innovations such as travelling clamps and pivoting grippers.
It allows fully automatic machining of various profile types, such as for windows, doors and curtain walls, using up to eight routing units that can operate freely on the profile cross-section in coordination with patented innovations such as travelling clamps and pivoting grippers.
- High degree of material utilization thanks to extra-long sheet formats up to 12 meters in length
- Wide spectrum of applications for steel, aluminum and other non-ferrous metals.
- With up to 6 kilowatts of laser power, stainless steel is cut with high precision up to a material thickness of 30 millimeters
- Fibre laser technology reduces operating costs by eliminating the need for laser gas and reducing power consumption
- 3-axis profile machining centre
- Designed for economical and efficient machining of aluminium, steel and stainless steel profiles
- All operations, such as routing, drilling and tapping, are performed while the profile bar is stationary to protect the profile surfaces
- The on-board turret head ensures that tool changing times are kept very short, thereby optimizing machining cycles
- The turret head can be equipped with eight tools or four angle routing heads
Automatic clamp positioning enables the machine to position the material clamps
Glass & A.L.U. CAD Ltd. have been manufacturing and supplying Powder Coating Plant since our formation and have a unique level of experience. Powder coating is an excellent alternative to wet paint and offers a superb finish. Solvents are avoided and far higher coating thickness is possible.
With powder coating, only the paint solids are sprayed onto the product, in an atomised powder form. the powder is drawn to the product and adheres to the product due to an electrostatic charge applied to the Powder during spraying.
The product, covered with the powder paint is then heated to around 200 degrees centigrade in our oven, wherein the powder fuses/melts on to the product and thus forms a smooth, tough and resilient coating.
With powder coating, only the paint solids are sprayed onto the product, in an atomised powder form. the powder is drawn to the product and adheres to the product due to an electrostatic charge applied to the Powder during spraying.
The product, covered with the powder paint is then heated to around 200 degrees centigrade in our oven, wherein the powder fuses/melts on to the product and thus forms a smooth, tough and resilient coating.
Glass & A.L.U. CAD Ltd. use the very latest sand blasting and shot blasting equipment, incorporating a full blast cabinet and all the required abrasives and nozzles to provide blast cleaning of any mobile parts in our facility.
Glass & A.L.U. CAD Ltd. has a state-of-the-art welding plant that uses the very latest welding technologies that are utilised to make our welds strong and reliable.
Glass & A.L.U. CAD Ltd. provides high quality SG Bonding for Glass and many other materials. When joining glass together we always use the latest adhesive technolgies to join glass elements together securely.
Glass & A.L.U. CAD Ltd. have been using a unitized roller line to speed up production and manufacturing processes.
We’re Here to Help
Glass & A.L.U. CAD Ltd. has a proven track record across Ireland and the U.K. in producing facades of any size or complexity precisely as designed, with attention to every detail.
